User manual
Table Of Contents
- Using this guide
- About ANAFI Ai documentation
- Prerequisites
- Foreword
- Disclaimer
- Technical specifications
- Package contents
- Presentation of ANAFI Ai
- Presentation of Parrot Skycontroller 4
- 4G Connectivity
- Data sharing and User accounts
- Obstacle avoidance
- Calibrations
- Pre-flight reminders
- Getting started
- Taking off
- Flying
- Returning home: Smart RTH
- Landing
- Smart LiPo Battery
- Media retrieval
- Introducing FreeFlight 7
- Settings
- Advanced Settings
- Videos, Photos and Panoramas
- Gimbal tilt and zoom controls
- Advanced imaging
- Missions: Piloting
- Missions: Photogrammetry
- Missions: Flight Plan
- Missions: Cameraman
- Missions: Vehicle
- Missions: Touch & Fly
- Flight logs and projects management
- Maintenance and Troubleshooting
- Appendix 1: Operational Checklist
V7.4.1.0 – published on December 20, 2022 22
Bottom view
About LEDs and assistance lights
LEDs ensure ANAFI Ai’s visibility, and they facilitate the visualization of the drone’s orientation in flight.
The right LED flashes for 0.4 seconds every 2-second cycle.
The left LED flashes for 0.4 seconds every 2-second cycle.
Both right and left LEDs are dimmed when the drone is landed.
The bottom LED is off when the drone is landed. It flashes in green for 0.4 seconds every 2-second cycle when
the drone is flying.
Its luminosity increases with the drone’s height over its take-off point, up to 5 meters.
Assistance white lights turn on in low light conditions, when ANAFI Ai is flying between 0.25 and 5.9 meters
above ground.
Low light & low
altitude
assistance lights
Vertical camera
Bottom LED
Time of Flight (ToF)
SD cover
Left LED