User manual

V7.4.1.0 – published on December 20, 2022 120
Therefore, Parrot recommends you immediately replace propeller blades which have sustained even a minor
contact with the environment– or to replace them every 50 flight hours, as part of scheduled maintenance.
ANAFI Ai propeller blades have been designed for instant, no tool replacement. To replace a propeller blade,
follow this simple procedure.
1. Unfold the arm that supports the blades which need to be replaced.
2. Hold the motor (round rotating part) of the propeller between your left thumb and index.
3. Unfold the blades and pinch the part which screws on the motor, between the blades, with your right
thumb and index.
A. blades: unscrew used A blades (left front & right B. blades: unscrew used B blades (left back &
back) counterclockwise and screw new ones right front) clockwise and screw new ones
clockwise. counterclockwise.
Double check your blades respect the following diagram before setting up ANAFI Ai for its next flight.
Propeller blades and ANAFI Ai smart batteries can be bought separately. Find an ANAFI Ai spare parts reseller
here.
Rebooting all systems
The first intent procedure, when the ecosystem does not perform as expected, is to power off and reboot
all elements of the ecosystem:
- device (kill FreeFlight 7 and reboot);
- Skycontroller 4; - ANAFI Ai.
Reinstalling FreeFlight 7
If you feel you must delete and reinstall FreeFlight 7 later, remember to back up all your device FreeFlight 7
media, as they will be deleted with the application.