User manual

V7.4.1.0 – published on December 20, 2022 119
- edit the project name with the pen icon;
- duplicate the project; - delete the project;
- open the project (you can double tap projects directly from the list to open them in the Flight Plan
mission interface).
Use the toggle at the top center of the screen to access Photogrammetry projects.
Tap “New” to create a new project in the Photogrammetry mission interface.
Tap a project to select it, the following options appear or activate:
- edit the project name with the pen icon;
- duplicate the project; - delete the project;
- open the project (you can double tap projects directly from the list to open them in the
Photogrammetry mission interface).
Tap “<” to go back to the dashboard.
Maintenance and Troubleshooting
This section describes basics procedures which enable you to maintain your drone and troubleshoot most
issues you can encounter using ANAFI Ai.
In addition, drone and controller resetting procedures can prove useful before a change of operator or
operating structure, for example.
Changing propeller blades
Propeller blades are instrumental for flight integrity and delicate pieces of equipment. Even minor contacts
with external elements (wall, tree branch, etc.) can invisibly damage their structure. Remember that for
safety ANAFI Ai is programmed to cut its motors instantly in case of impact on one of its propeller blades:
always control your drone carefully.
Photogrammetry
projects