User manual

V7.4.1.0 – published on December 20, 2022 113
• If the vehicle is moving and the landing zone cannot be acquired after 8 seconds, the drone
automatically lands at a reduced speed. FreeFlight 7 will prompt you to adjust the drone’s position.
• If the vehicle is stopped, the drone keeps descending while searching for the landing zone. If the
landing zone cannot be acquired, FreeFlight 7 prompts you to adjust the drone’s position and the
drone lands while tracking the vehicle position.
When the landing zone has been acquired, the top center of the screen displays a “Precise landing”
notification.
Precise landing activated
This is ANAFI Ai’s final approach signal: from there it descends steadily, around 1 m/s, from 8 m height to its
landing point.
• Stabilize the direction of your vehicle, and steady its speed under 25 km/h (15.5 mph).
Until ANAFI Ai has safely landed, the Vehicle landing can be aborted by reclaiming the thrust commands and
making the drone climb, if any issue arises (GPS loss, bump on the road, wind gusts, water too choppy, etc.).
• Always monitor and control Vehicle mission landings with care and do not hesitate in briefly stopping
the vehicle to perform a safer landing if you feel unsure about motion landing conditions.
Missions: Touch & Fly
Touch & Fly: Waypoint
The Waypoint (WP) “Touch & Fly” mode enables you to fly ANAFI Ai to any point on the map. Tap
“Touch & Fly” from the “PILOTING MODE” box menu. The map of your surroundings opens full
screen. The live image captured by ANAFI Ai is minimized in the top right corner of your screen.