User manual

V7.4.1.0 – published on December 20, 2022 109
In other words, the drone follows the vehicle by default, even when the command is activated. However,
you keep control of the precise trajectory of ANAFI Ai, of its direction, and thus of the framing of the camera.
When you are following a vehicle, a link appears between your drone and the vehicle to symbolize the
“tracking mission”.
During a Vehicle mission, activating the RTH command initiates a return sequence toward the vehicle
(“Returning to vehicle”). The following sections describe all phases of Vehicle missions.
Vehicle take-off
1. Set up ANAFI Ai in the direction of the movement of the vehicle.
2. Check your operating area provides GPS synchronization for both the drone and the controller.
3. Stabilize the speed of the vehicle under 25 km/h (15.5 mph).
4. Activate the Vehicle mission from the “MISSIONS” icon on the bottom left of the FreeFlight 7
screen.
5. Stabilize the direction of the vehicle: if possible, take off from a straight stretch of a road.
Take-off complete, RTH position set
6.
Activate
the
button
:
ANAFI
Ai
takes off,
stabilizes 5
m above its take
-
off point
,
tracks
and
follows
the vehicle.
All green for take
-
off