User manual

V7.4.1.0 – published on December 20, 2022 108
To end the following of your target, tap the white square on red background (“STOP button”) in the bottom
right corner of the HUD.
When no target is selected, or when the following of the target has been ended by the pilot, ANAFI Ai’s
behavior is similar to that of the Piloting mission.
Activate and monitor the Cameraman mode with care: always check your flight plan and the trajectory of
your subject are clear from obstacles and safe, always retain visual contact with ANAFI Ai, and always be
ready to stop the following (tap the “STOP button” of your HUD) in case a danger or any sort of unexpected
obstacle arises.
Missions: Vehicle
The Vehicle mission enables authorized pilots to take off and control their drone from a moving vehicle (for
example a platform-van or a boat), then to land it back safely on the moving vehicle (up to a 25 km/h or 17.5
mph speed).
• Vehicle missions consume more energy: increase the safety margins on your battery readings – if you
normally land with batteries at 20 %, aim for 30 %.
• Set up ANAFI Ai for take-off in the direction of the moving platform motion.
• This feature requires a double GPS fix (drone and device) to be activated.
• Parrot recommends initiating Vehicle mission flights from a distinctive take-off platform such as a
black and white landing pad. You can download and print, with a minimum size of 70cm x 70cm, the
Parrot landing pad available here.
From take-off, ANAFI Ai synchronizes its speed and trajectory to that of the vehicle, tracking and following
it. The pilot retains control of the flight of the drone, relative to the vehicle’s reference.
Landing pad
preview