Instructions / Assembly

STEP 4
SWITCH OFF THE ELECTRICAL MAINS AT
THE CIRCUIT BREAKER FUSE BOX.
1) Connect wires from receiver to
2) Insert the controller and led
driver into the space of the mounting
bracket, and tidy up the wiring.
STEP 5
1) Carefully push the canopy to the
bottom of the mounting bracket,
make two sliding holes aligned to the
two prominent screws on the
mounting bracket, and then turn
clockwise until tight.
2) Push the canopy ring to the
bottom of the canopy, slide the inner
holes aligned to the two prominent
screws on the mounting bracket
again, and turn the canopy ring
clockwise until tight.
INSTALLATION INSTRUCTION
Neutral (Blue)
Earth (Green/Yellow)
Live (Brown)
MOTOR U
MOTOR W
MOTOR V
AC IN N
AC IN L
Controller
Hanger Ball
G
Light
Fan
-
+
FOR LIGHT L
FOR LIGHT N
G
Led Driver
Canopy
Canopy Ring
Controller
Led Driver
power supply with wire connectors.
mounting bracket
7