F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER F6231
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER THANK YOU FOR YOUR PURCHASE Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product SAFETY TIPS 1.
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER working around or cleaning the fan. 15. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning. NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may occur.
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 2 1 x2 3 4 6 5 x2 7 x4 x2 x2
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 8 9 10 11 12 13 HT LIG GH LI L L T L L MOTOR 14 N N RECEIVER N RECEIVER N 15 A B L N
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 16 17 X15 X15 X5 X10 X5 18 19 X2 X5 X10 20 21 R F X3 X2 X3 22
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER hr 3 2 1 248
F6231 Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AFTER INSTALLATION WOBBLE” The fan blades have been adjusted in the factory to minimize any wobble NOTE:CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE MOUNTED ON A RUBBER CROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE CEILING, IT WOULD CAUSE EXCESS VIBRATION.
