User's Manual

ENGLISH
2120
LOSS OF CONNECTION
If the connection is lost during flight between your Parrot Skycon-
troller 2 and your Parrot Disco, the Parrot Disco will fly in 60-meter
diameter circles for a specified time period (10 seconds by default).
If the connection is not restored, the Parrot Disco returns to its star-
ting position and then flies in 60-meter diameter circles.
If the connection is not restored after 5 minutes, the Parrot Disco
performs a circular landing.
TURNING OFF THE PARROT DISCO
To turn off the Parrot Disco, press and hold down the On/Off button.
> The red light flashes, and then the Parrot Disco turns off.
RETRIEVING YOUR PHOTOS
AND VIDEOS
ON YOUR COMPUTER
Always use the micro USB port to the left of the Parrot C.H.U.C.K.
1. Connect the Parrot Disco to your computer with the USB/micro
USB (provided).
2. Turn on the Parrot Disco.
> Your computer will automatically detect the Parrot Disco.
3. Open the folder as if it were a USB flash drive.
4. Copy the photo and video recordings onto your computer.
ON YOUR SMARTPHONE
To retrieve photos and/or videos from the FreeFlight Pro applica-
tion:
1. Turn on your Parrot Disco and connect it via Wi-Fi to your smart-
phone.
2. On your smartphone, launch the FreeFlight Pro application and
go to Menu > Internal Memory.
> The list of photos and videos stored in the internal memory of
the Parrot Disco appears.
3. Select one or multiple photos and/or videos.
4. Press Transfer to retrieve the photos and/or videos.
UPDATING THE PARROT DISCO
VIA A SMARTPHONE
1. Connect your smartphone to the Internet.
2. Launch the FreeFlight Pro application.
5. Go to Menu > Updates.
6. Select the new version and press Start.
> The application downloads the update file.
1. Connect your smartphone to the Parrot Disco’s Wi-Fi network.
2. Restart the FreeFlight Pro application.
7. Go to Menu > Updates.
> A pop-up window prompts you to install the update.
8. Press OK and wait until the installation is complete.
> The Parrot Disco automatically restarts.
9. Make sure the new version has actually been installed: in the
FreeFlight Pro application, go to Menu > Settings. The ver-
sion number is shown in the general information.