Instruction manual

EN

Bindyouraircraftandtransmitterbeforedoingthesetests.Movethecontrolsonthetransmittertomakesuretheaircraftcontrolsurfacesmovecorrectly.Reverse
controlsinyourtransmitterasnecessary.AfterdoingtheControlTest,correctlysetthefailsafe.Makesurethetransmittercontrolsareatneutralandthethrottle
andthrottletrimareinthelowposition,thenrebindthemodeltoyourtransmitter.Ifthereceiverlosesitslinktothetransmitter,thefailsafemakesthecontrols
andthethrottlereverttothesettingsmadeatbinding.






11