Manualshelf

User Manual

ManualsBrandsParkZone ManualsHobbyF4F Wildcat 1.0m BNF Basic with AS3X and SAFE Select
891011121314151617
12
EN
A
A
B
D
C
E
F
Service of Power Components
CAUTION: Always disconnect the fl ight battery from the model before
removing the propeller.
Disassembly
1. Loosen the spinner nut (A) on the collet shaft and remove.
2. Remove the propeller (B) from the collet shaft.
3. Remove the collet (D) from the motor shaft.
4. Remove the (4) screws (C) from the cowl.
5. Remove (4) screws (E) from the motor mount (F) and the fuselage.
6. Assemble in reverse order.
Assembly Tips
• Correctly align and connect the motor wire colors with the ESC wires.
• Ensure that all screws are tight and secure.
Service and Repair
NOTICE: If you replace the receiver, install the new receiver in the same
orientation and manner as the original receiver or damage may result.
Thanks to the EPO material, repairs to the foam can be made using regular CA
(cyanoacrylate adhesive).