PSS 250 ORBITAL SANDER Operation and Safety Notes 6 35324_ORBITAL SANDER_Cover_LB6.indd 2 21.07.
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes 35324_ORBITAL SANDER_Cover_LB6.indd 3 Page 5 21.07.
1 2 11 3 10 4 5 6 6 8 7 B A C 9 D 12 35324_ORBITAL SANDER_Cover_LB6.indd 4 E F 21.07.
Table of contents Introduction Intended use...................................................................................................................Page Features..........................................................................................................................Page Delivery contents............................................................................................................Page Technical Data....................................................................
Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice for electrical power tools Q Technical Data Nominal voltage: 230 V ~ 50 Hz Nominal power: 250 W Idle speed: n0 7.000 - 12.000 rpm Idle oscillation speed: n0 14.000 - 24.000 rpm Sanding sheet dimensions: Hook and loop fastening 93 x 185 mm Clamp fastening 93 x 230 mm Protection class: II / Noise and vibration data: Values determined in accordance with EN 60745 The sound pressure level (A-weighted) of the device is typically 82 dB(A). Uncertainty K = 3 dB.
General safety advice for electrical power tools b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g.
General safety advice for electrical power tools d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely.
General safety advice for electrical power tools / Operation a stop before setting down the oscillating sander. J Always pull the power plug out of the socket for all work pauses, before any work on the appliance (e.g. changing the sanding paper) and when not in use. J The appliance must always be kept clean, dry and free of oil or lubricating greases. Q Original ancillaries / and accessories J Only use accessories and tools that are specified in the operating instructions.
Operation metals or metal objects left in wood. This can happen especially if the wood dust has paint particles on it or is mixed with other chemical substances and the sanded material is hot after extensive working. You should therefore avoid overheating of products being sanded as well as the appliance and always empty the dust collection box 4 or the dust bag of the vacuum cleaner before work pauses.
Maintenance and cleaning / Service centre / Warranty / Disposal Q Maintenance and Cleaning Warning! DANGER OF INJURY! Before performing any work on the appliance, disconnect the power plug. j Clean the appliance regularly, preferably always immediately after use. j Do not use any sharp objects for cleaning the appliance. Never permit fluids to permeate inside the appliance. j Use a cloth to clean the casing. Never use petrol, solvents or cleansers that damage plastics.
Disposal / Conformity Declaration / Manufacturer tools must be collected separately and subjected to an environmentally friendly recycling procedure. Q Conformity Declaration / Manufacturer Your local communal or municipal authorities can provide information on how to dispose of the wornout appliance. We, Kompernaß GmbH, Burgstr.
IAN 35324 KompernaSS GmbH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 07 / 2009 · Ident.-No.: PSS 250072009-6 35324_ORBITAL SANDER_Cover_LB6.indd 1 6 21.07.
