Operation Manual

33
IEGB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not
start
Power is off
Check the socket, cable, wire
and plug and have any repairs
carried out by an electrician
Defective on/off switch
(
A
12)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar (
A
1).
Motor stops Blockage by foreign object Remove the foreign bject
Result unsatisfactory
or motor labours
Cut height too low Set a higher cut height
Blade
(
I
18) blunt
Have the blade sharpened
or replace it
Blade area blocked Clean the equipment
Blade assembled incorrectly Install the blade correctly
Blade fails to turn
Blade blocked by grass Remove the grass
Blade screw
(
I
17)loose
Tighten the blade screw
Strange noises,
rattling or vibrations
Blade screw
(
I
17) loose
Tighten the blade screw
Blade damaged Replace the blade
Replacement parts / Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” Page 32). Please have the order number mentioned below ready.
Position
instruction
manual
Description Order No.
I
18
Spare blade (manufacturer's designation: GD65BX.00.03.X1.03.X)
incl. screw
13700204
A
4
Lawn box 91104095