Operation Manual

21
IEGB
D
20 Level gauge
21 Wheel axle
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable
to three levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical

Electric Lawnmower ..PRM 1200 A1
Motor input power .....................1200 W
Mains voltage ........ 220 V-240 V~, 50 Hz
Idling speed ........................... 3500min
-1
Blade width ................................. 32 cm
Cut height ................... 20 / 40 / 60 mm
Protection class ................................
II
Protection type ............................... IP 24
Weight ........................... approx. 9.2 kg
Lawn box volume ............................. 30 l

(L
pA
) ........................ 86 dB(A); K
pA
= 3 dB
 (L
WA
)
measured ....... 91,8 dB(A); K
WA
= 2,56 dB
guaranteed ..............................95 dB(A)
Vibration on the handle
(a
h
) .......................................
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assessment.
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 holders to attach the
connection cable
- Instruction Manual
Overview
A
1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
10 Release button
11 Cable strain relief
12 Start lever
B
13 Screws for lower bar
C
14 Screws for curved handle
D
15 Handle
16 upper part of grass box
I
17 Blade screw
18 Blade
19 Motor spindle