PPHSS 730 SE JIGSAW Operation and Safety Notes 6
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device.
18 17 1 16 2 3 13 15 4 18 17 16 15 19 14 A 7 20 13 12 11 10 9 8 B C 21 8 19 D E F 6 5
70 mm 65 mm 30 mm 110 mm 10 mm ø 30 mm 260 mm 150 mm 205 mm
1 0 0 0 0 0 1 0 You need: 3 1 1 x 395 mm x 185 mm x 10 mm 2 2 2 x 395 mm x 120 mm x 10 mm 3 2 x 260 mm x 205 mm x 10 mm 4 1 x ø 30 mm x 400 mm 10 mm
Table of contents Introduction Proper use ......................................................................................................................Page Features and equipment ...............................................................................................Page Included items ...............................................................................................................Page Technical information ......................................................................
Introduction The following pictograms are used in these operating instructions / on the device: V~ W Read instruction manual! Safety class II Observe caution and safety notes! Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice for electrical power tools Included items 1 Jigsaw including - Dust extraction spout - Allen key - Chip guard 1 Guide fence 1 Operating instructions 2 Saw blades for wood 1 Saw blade for metal Technical information Jigsaw: Rated voltage: Power consumption: No-load speed: Cutting depth: Pendulum action: Inclined cut: Protection class: Parkside PPHSS 730 SE 230 V ~ 50 Hz 730 W max. n0 600 - 2900 min-1 max.
General safety advice for electrical power tools 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body.
General safety advice for electrical power tools b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device.
General safety advice for electrical power tools / Preparing for use Use only undamaged, defect-free saw blades. Distorted or blunt saw blades can break or cause a kickback. Always keep the device clean, dry and free of oil or grease. Original accessories / attachments Use only the accessories and attachments de- any of these saw blades provided they have the correct shank fitting (single lug shank).
Preparing for use / Operation / Maintenance and cleaning Attaching the guide fence Setting the pendulum action The guide fence 19 can be attached on the left or right side of the device (see Fig. A). Release the two locking screws of the fence guide openings 15 . Slide the guide fence 19 into the fence guide openings 15 . Retighten the two locking screws.
Maintenance and cleaning / Service centre / Warranty / Disposal Remove dirt (e.g. caused by sawdust or splinters). GB Use a dry cloth. Service centre WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. WARNING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre.
Declaration of Conformity / Manufacturer Declaration of Conformity / Manufacturer We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, declare that this product complies with the following EU directives: Machinery Directive (89 / 392 / EC), (91 / 368 / EC), (93 / 44 / EC) EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (89 / 336 / EC, 92 / 31 / EC) Type / Device description: Jigsaw PPHSS 730 SE Bochum, 31.10.
IAN 37833 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 10 / 2009 Ident.-No.
