HOT GLUE GUN PHP 500 A1 HOT GLUE GUN Operation and Safety Notes 6
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
1 2 8 3 7 A 6 9 5 4 B C E F 8 D 10 11
Table of contents Introduction Proper use......................................................................................................................Page Features .........................................................................................................................Page Included items ...............................................................................................................Page Technical details ...............................................................
Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! For indoor use only! V~ Volt (AC) Risk of loss of life by electric shock from damaged mains lead or mains plug! W Watts (Effective power) Danger of burns from nozzle or glue (up to 200 °C)! Safety class II Cordless working Observe caution and safety notes! Wear protective gloves! Keep children away from electrical devices! Dispose packaging and appliance in an environmentally-
Introduction / Safety notes Technical details Nominal voltage: Nominal power: Heating up time: Protection class: 230 V~ 50 Hz approx. 40 W (500 W) approx. 4 min. II / Safety notes ATTENTION! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and / or serious injury. Keep all the safety advice and instructions in a safe place for future reference! 1.
Safety notes / Operation b) To avoid the danger of injury, burning and damage to health: DANGER OF BURNS! The glue and the nozzle can reach temperatures of 200 °C. Do not touch the nozzle or the glue. Keep other people and animals away from the hot glue. On contact with the skin, hold the affected part under running cold water for several minutes. Do not try to remove the glue from the skin. 4.
Operation / Maintenance and Cleaning / Service / Warranty Gluing: Press the feed clamp 5 to regulate the flow of glue as required for your work. 1. Apply the glue in individual dots. Apply in zigzags on flexible materials such as fabrics. 2. Immediately after applying the glue, press the two materials together for about 30 seconds. The glued joint can be loaded after about 5 minutes. 3. When you take a break from work, set the glue gun down on the wire stand 6 or in the charger 4 . 4.
Warranty / Disposal / Declaration of Conformity / Manufacturer IE Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com Declaration of Conformity / Manufacturer We, Kompernaß GmbH, the person responsible for documents: Mr Felix Becker, Burgstr.
IAN 54325 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 06 / 2010 Ident.-No.