PFS 710 Operation and Safety Notes Operation and Safety Notes...............................................................................................
a k i b c j d e h A g f B C l m n o D E F Kompernaß GmbH Burgstraße 21 · D-44867 Bochum (Germany) Last Information Update: 10 / 2006 · Ident.-No.
Table of Content Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Introduction / Safety Sabre saw PFS 710 L L Introduction 1 Sabre Saw PFS 710 1 Allen key 4 Sawblades 1 Operating manual 1 Booklet „Guarantee and Service“ All-purpose saw for house and garden L Your safety Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. Further details can be found in the operating instructions. Keep these instructions in a safe place.
Safety L Workplace-Safety J Keep your workplace clean and tidy. Disorder and poorly lit working areas can lead to accidents. J Do not use this appliance in areas where there is a potential danger of explosions of inflammable liquids, gases or dust. Electrical hand tools produce sparks which could ignite the dust or vapours. J When using electrical tools, ensure that children and other persons are not in the close vicinity. In the event of distraction you could lose control over the appliance.
Safety J Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves well away from moving components. Wear a hairnet if you have long hair. Loose, not well-fitting clothing, jewellery and long hair can become caught up in moving components. J Use dust suction and / or collection units if these can be assembled. Thereby take note that the dust collection units fitted must be suitable for this particular area of application.
Safety / Before taking into use L Understood everything? J When you have made yourself familiar with these general safety instructions for electrical hand tools, and, with the help of the appropriate operating instructions, are familiar with the functions and handling of your electrical hand tool, then you can start with the work. Then, you will work at your safest under consideration of the declarations and instructions of the manufacturer.
Before taking into use / Preparing the saw for use mounting hole in the saw blade. The blade must not pull out. 3. Firmly retighten the Allen screw f. Check that the saw blade is fixed safely and firmly before taking the appliance into operation. L Blade speed setting wheel With the adjusting wheel a you can pre-select the desired number of strokes (Number of to and fro movements) (MIN. = smallest number of movements, MAX. = largest number of movements).
Preparing the saw for use / Cleaning / Disposal / Information j The footplate g must always be set against the workpiece surface. j Saw through the workpiece using even pressure and speed of progress. Flush sawing: With so-called elastic bi-metallic saw blades, presupposing the appropriate length, projecting workpieces such as pipework protruding from the wall can be sawn off adjacent to the wall (see also Fig. D). Follow these steps: 1. Place the saw blade directly on the wall surface. 2.
Information L D eclaration of conformity / Manufacturer We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: Machinery Directive (98 / 37 / EC) EU Low Voltage Directive (73 / 23 / EEC) Electromagnetic compatibility (89 / 336 / EEC) Description / Model type: Parkside Sabre saw PFS 710 Bochum, 31.10.
