PEH 30 ELECTRIC PLANER Operation and Safety Notes 6
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
11 12 13 3 14 1 2 3 4 5 6 7 10 A 9 15 8 B 9 16
C D 17 26 9 E 9 17 18 22 20 21 F 23 19 G H 45° 24 I 6 23 25 J 4 5
Table of contents Introduction Proper use ......................................................................................................................Page Features and equipment ...............................................................................................Page Included items ...............................................................................................................Page Technical data .............................................................................
Introduction The following pictograms are used in these operating instructions / on the device: V~ W n0 Read instruction manual! Safety class II Observe caution and safety notes! Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice for electrical power tools Included items 1 1 1 1 1 1 1 Electric planer PEH 30 Guide fence Rebate depth stop Allen key Open spanner Reducer piece Operating instructions Technical data Rated voltage: Rated power: Design no-load speed: Planing depth: Planing width: Protection class: 230 V~ 50 Hz 750 W n0 13,000 rpm 0 - 3.0 mm 82 mm II / Noise and vibration data: Values determined in accordance with EN 60745.
General safety advice for electrical power tools b) c) d) e) f) an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock.
General safety advice for electrical power tools the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people.
General safety advice for electrical power tools / Preparing for use Use sharp planer blades only. Do not soak the materials or the sur face you are about to work on with liquids containing solvents. Avoid contact with rotating parts. Never use the device for a purpose for which it was not intended or with non-original parts / accessories. Hold the device securely when working. Ensure that you are standing in a stable, well-balanced position.
Preparing for use When planing, the parking shoe 16 swings up and exposes the rear part of the sole 9 . The planing process CAUTION! DANGER OF KICKBACK! Always switch on the device before placing it against the workpiece. Set the required cutting depth. Switch on the device. Always place the front part of the sole 9 down first on to the workpiece. Guide the device with even forward movement over the surface being planed.
Preparing for use / Maintenance and cleaning / Service centre / Warranty 2. Push the cutting element 18 sideways out from the blade shaft 17 . 3. Push the planer blade 20 sideways out from the cutting element 18 . NOTE: The blade shaft 17 can also be taken apart, e.g. for cleaning. 4. Reassembly is carried out in the reverse order with a reversed or new planer blade. 5. Planer blades 20 can be obtained from the service address indicated (see section about warranty).
Warranty / Disposal / Declaration of Conformity / Manufacturer IE Kompernaß Service Ireland Tel.: 1850 930 412 (0,082 €/Min.) * Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com We, Kompernaß GmbH, Burgstr.
IAN 37667 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 10 / 2009 Ident.-No.
