DOUBLEGRINDING MACHINE Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. PDS 200 A Double grinding machine Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Last Information Update 08 / 2007 Ident.-No.
G 14 H 14 1 2 2 3 2 4 5 6 7 7 7 I K 2 2 8 9 A B 13 11 C 10 12 3 L M 6 5 6 D N E 5 3 7 O F 7
Table of contents Introduction Proper use......................................................................................................................................Page Features and equipment................................................................................................Page Included items................................................................................................................Page Technical information.......................................................
Introduction The following pictogrammes / symbols are used in these operating instructions: Read the operating instructions! V~ W Always heed warning labels and safety instructions! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Caution - Danger of electric shock! Hazardous voltage – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture.
Introduction / Safety advice Included items Safety advice Check that all the items and accessories are present immediately after unpacking the device: J 1 Double grinding machine PDS 200 A with - 2 x eye guard mounts / eye guards - 2 x workpiece/tool rests / adjuster screws 1 Operating instructions 1 Booklet covering “Warranty and service” Technical information Rated voltage: Nom.
Safety advice J Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads or plugs increase the risk of electric shock.
Safety advice J J not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Look after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools.
Safety advice / Before use / Preparing for first use J J when you are not using the device, always pull the mains plug out of the mains socket. Handle the device carefully and treat it with respect. Always keep the device clean, dry and free of oil or grease. Remain alert at all times! Always watch what you are doing and proceed with caution. Do not use the device if you cannot concentrate or you are feeling unwell.
Preparing for first use / Maintenance and cleaning Switching on j Press the ON / OFF switch 9 into the „1“ position to switch the device on and run it at a constant speed Switching off j Press the ON / OFF switch 9 into the „0“ position to switch the device off. Grinding a workpiece j Switch on the machine as described above. j To grind metal tools or metal items, place the workpiece on the workpiece/tool rest 5 and slowly bring it up to the grinding wheel 4 .
Maintenance and cleaning / Disposal / Information strong solvents. j Store the device in a dry room. Disposal The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.
