BELT SANDER 600 WATT PEBS 600 BELT SANDER 600 WATT Operation and Safety Notes 6 30176_Bandschleifer_Cover_LB6.indd 2 03.04.
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes 30176_Bandschleifer_Cover_LB6.indd 3 Page 5 03.04.
2 3 4 1 7 6 A B 5 C 8 13 12 9 D E 10 F 11 30176_Bandschleifer_Cover_LB6.indd 4 03.04.
Table of Content Introduction Proper use......................................................................................................................Page Features and equipment................................................................................................Page Included items................................................................................................................Page Technical information........................................................................
Introduction The following pictograms are used in these operating instructions / on the device: n0 V~ W Read instruction manual! Safety class II Observe caution and safety notes! Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice for electrical power tools 1 Vacuum extraction adapter and reducer piece (for external vacuum extraction) 2 Clamps 1 Operating instructions Q Technical information Belt sander: Nominal voltage: Nom. power input: No-load belt speed: Sanding belt Protection class: Parkside PEBS 600 230 V ~ 50 Hz 600 W 170 - 250 m / min 75 x 457 mm II / Noise and vibration data: Values determined in accordance with EN 60745.
General safety advice for electrical power tools b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g.
General safety advice for electrical power tools / Preparing for use d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely.
Preparing for use Q Tensioning / changing sanding belt the Warning! DANGER OF INJURY! Before you carry out any work on the belt sander always pull the plug out of the mains socket. 1. Then release the tensioner for the sanding belt by moving the tensioning lever 10 fully outwards (see fig. C). The sanding belt 8 can be removed. 2. Next insert a new sanding belt 8 or change the belt for one suitable for a different material or one with a different grit size.
Preparing for use / Operation DANGER OF FIRE FROM FLYING SPARKS! Do not use any form of dust extraction (dust box 5 or vacuum extraction device) if you are sanding metal. Connection: j Push the adapter for external vacuum extraction 12 into the adapter port 9 . If it is necessary to use the reducer piece 13 , push the reducer piece into the adapter for external vacuum extraction 12 . j Slide the hose of a suitable dust extraction device approved for that purpose (e.g.
Operation / Maintenance and cleaning / Disposal Tips and tricks Material / type of work Sanding varnish Q Coarse finish (Grit grade) 150 j Never use the same sanding belt to sand wood Fine finish (Grit grade) 320 Preselected rotation speed low (1-2) Material / type of work Rust removal Coarse finish (Grit grade) 40 and metal. j Worn or ripped sanding belts can damage the workpiece. Change sanding belts at the appropriate time.
Information Q Information Q Service centre J Warning! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. J Warning! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. Bilston (Great Britain) WV14 7EG Tel.
IAN: 30176 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 03 / 2009 · Ident.-No.: PEBS600032009-6 30176_Bandschleifer_Cover_LB6.indd 1 6 03.04.
