HEAT GUN PHLG 2000 B1 HEAT GUN Operation and Safety Notes 6
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
1 3 2 A 4 B 5 C 6 D 7 E
Table of contents Introduction Proper use......................................................................................................................Page Features and equipment ...............................................................................................Page Included items ...............................................................................................................Page Technical information .......................................................................
Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Keep children away from electrical power tools! V~ Volt (AC) Caution – electric shock! Danger to life! W Watts (Effective power) Risk of loss of life by electric shock from damaged mains lead or mains plug! Safety class II Wear hearing protection, dust protection mask, protective glasses and protective gloves.
Introduction / General safety advice for electrical power tools Temperatures (Jet outlet nozzle): 2. Electrical safety Setting I: ca. 350 °C Setting II: ca. 550 °C Protection class: The sound pressure level (A) of the device is typically less than 70 dB (A). General safety advice for electrical power tools Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury.
General safety advice for electrical power tools b) c) d) e) f) g) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Avoid unintentional operation of the device.
General safety advice for electrical power tools / Operation without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device. ATTENTION! To avoid the danger of injury, burning and dangers to your health: If danger arises, pull the mains plug immediately out of the mains socket. DANGER OF PERSONAL INJURY! Never use the appliance as a hair dryer. Do not direct the heat flow at persons or animals.
Operation / Cleaning / Service / Warranty Changing the nozzle Too much heat causes paints and plastics to ignite. CAUTION! Do not inhale the resulting vapours. Protector nozzle 4 – for removing paint and varnish (see Ill. B): Place the protector nozzle 4 on the outlet tube 3 . The spatula shape of the nozzle ensures the air is properly directed. Use a separate spatula for removing paint or varnish. Flat nozzle 5 – for detaching glues, softening paint (see Ill.
Warranty / Disposal and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries.
Declaration of Conformity / Manufacturer Declaration of Conformity / Manufacturer We, Kompernaß GmbH, the person responsible for documents: Mr Felix Becker, Burgstr.
IAN 61646 KOMPERNASS GMBH Burgstraße 21 D-44867 Bochum © by ORFGEN Marketing Last Information Update: 02 / 2011 Ident.-No.
