DVR009 User Manual Please read this manual carefully before using the Digital Video Recorder
Preface Precautions General precautions · Do not expose this product to dusty, dirty or sandy areas to reduce the risk of damaging components. · Do not expose the recorder to high temperature. High temperature may shorten the life span of this electronic device. · Do not situate the recorder under cold environment. When the product is preheated to its correct temperature, there will be moisture inside and damage the circuit. · Do not try to disassemble or repair by yourself.
1.2 Recorder appearance and feature icons 1. GPS tracker box is also a bracket .3M sticker adheres when installing to the surface. 2.USB port 3. AV port 4.Up button/menu/mute button 5. OK 6. Down /SOS button 7. Light indicator 8.Lens 9.USB power input 10. Power on/off/reset (Long press resets the unit) 11.HDMI port 12.TFslot Installation The dvr can be fitted to any flat surface but is recommended installation of the dvr is at the top of the windscreen, to give you the best field of view.
some problem because the speed of the card is too fast, it is better not to use class 10 card ) 2.2 Turning on your recorder Press Power button to turn the power on/off. Or connect to the car charger ,it will turn on when the car starts . 2.3 Take a picture Taking a still picture 1. On recording , Long press "OK" button and take a picture 2. On stand by ,Long press "OK" button and take a picture 2.4 Reviewing the pictures 1.
2.5.4 Setting other features Read this chapter to know how to configure the setup and fine-tune the functions Power on the recorder. Press Menu (Long time press up button ) ,then press up and down button to choose the icons and press OK button to confirm . 1.Video resolution :FULL HD ,1080P30 ,720P30 2.Photo size: 12M,8M,5M,3M 3.Flicker :50/60Hz Use this function to set the flicker frequency in your area. (uk 50hz) 4.AE ISO :AUTO/100/200/400 5.
2.5.6 GPS: Open/close GPS tracking 1. Plug in the GPS module to the DVR, satellite searching will start automatically . 2. When GPS signal is located, will be showed on the display . 3. When taking picture in Camera mode , location will be recorded automatically 2.6 Review/playing your video files 1. Long press "Down" button and into Movie reviewing to display the latest video files on the LCD screen . 2.
01：07AM Segmented recording time loop GPS 3.2 Playback mode Using Play back mode to display all the video files saved in the DVR . see the table below 000:00:15 Playback time Play Battery Pause 3.3 USB mode You can use USB mode to connect with the host PC.( (Effective under recording settings off) ) When the recorder is connected with the host PC, it appears as a removable disk in the Windows explorer. 4.Protection 4.1 When reviewing the video, 1.
Internal memory Built-in 256/512MB (Optional) ISO Auto Display 1.5″TFT Still images Format ： JPEG （ Image resolution ： 3M 、 5M 、 8M （ Software Interpolation） 、12M（Software Interpolation） Quality：Auto Videos Format：H.264 (MOV) Resolution ： 1944×1080 30fps 、 1920×1080 30fps 、 1280×720 30fps、 Quality：Auto Audio Built-in microphone/ speaker Tape Yes White Balance Auto Tungsten Daylight Cloudy Fill light Fluorescent Exposure compensation -2.0EV~+2.
All the buttons are invalid. Short-circuit when connecting camcorder with other equipment. Long press the power button Light indicator Red ,charging blue ,stand by Blue flashing recording Recorder Parts Name Quantity (PCS) Recorder 1 Car Adapter (Output: 5V) 1 USB cable 1 3M sticker 1 Car Fixed Bracket 1 User Manual 1 NOTE: Alterations reserved. About the Manual We have tried our best to make sure that what is in this manual is right and updated.
