Full Product Manual

44
DC MANAGEMENT
bluesea.com
ST Blade Split Bus Fuse Block
Two isolated 6-circuit fuse blocks with a negative bus
For use when a mix of switched and 24-hour circuits are desired
in the same block
• Common and/or independent source fuse block
• Provides two isolated groups of six ATO
®
/ATC
®
circuits
• For use with either two isolated batteries or with a single battery
providing a mix of 24-hour and switched circuits
• Clear insulating cover with provision to store two spare fuses
• Accepts ring terminals
• Easy to open, push button latch provides easy access to fuses
• Tin-plated copper buses and fuse clips
• Includes 20 write-on circuit labels
• Fuses sold separately (page 40)
• Includes fuse puller
Specications
Voltage Max Operating 32V DC
Amperage Max Operating 30A per circuit
100A total (not to exceed 80A per load group)
Fuse Type ATO
®
or ATC
®
Fuses
Screw Terminal #8-32 Screws with captive star lock washer
Mounting #8 Screw (M4)
Recommended Wire Size Positive Feed: 4–6 AWG (25–16 mm²)
Branch Circuits: 10–16 AWG (6–15 mm²)
Recommended Torque #10 Stud: 24 in-lb (2.71 N-m)
#8 Screw: 18 in-lb (2.03 N-m)
7.35"
186.6mm
6.33"
160.8mm
2.50"
63.5mm
3.32"
84.2mm
1.51"
38.4mm
5032-BSS
24-Hour
Circuits
Fish Finder
GPS
Stereo
Clock
Alarm
Switch
Bilge Pump
Switched
Circuits
From
Device
Negative
From
Device
Negative
Baitwell
Light
Electronics
Fume Detector
Bilge Alarm
Fire Detector
Application Diagram
Six 24-Hour Circuits and Six Switched Circuits
Part # Circuits Cover Negative Bus Positive Bus
5032-BSS 12 Yes #10–32 stud #10–32 stud