Full Product Manual

39
DC MANAGEMENT
bluesea.com
ST Blade Battery Terminal Mount
Fuse Block Kit
Easily add 4 fused circuits to the terminal of a battery.
Provides power to new accessories in your boat or vehicle.
• Mounts on the battery terminal stud
• Screw terminals for securing wires
• Clear insulating cover accepts small format labels
• Ignition Protected—for use in a gasoline engine compartment
• Includes a 4-circuit negative busbar
• Includes write-on circuit labels and insulated ring terminals
• Fuses sold separately (page 40)
ST Blade Battery Terminal Mount Fuse Block
Specications
Voltage Max Operating 32V DC
Amperage Max Operating 30A per circuit
Amperage Max Operating 100A per block
Fuse Type ATO
®
or ATC
®
Fuses
Bus Material Tin-Plated Copper C11000
Mounting Thru-hole Clearance for 3/8" [M10] stud
Screw Terminal #8–32 Screws with
captive star lock washer
Regulatory
Meets ISO 8846 and SAE J1171 external ignition protection
requirements
Battery Terminal Mount BusBar
Specications
Continuous Rating 100A DC
Voltage Max Operating 32V DC
Bus Material Tin-Plated Copper C11000
Mounting Thru-hole Clearance for 3/8" [M10] stud
Screw Terminal #8–32 Screws with
captive star lock washer
5024-BSS
5024-BSS ST-Blade Terminal Mount Fuse Block
Kit installed on a sealed battery
Part # Description
5024-BSS ST-Blade Battery Terminal Mount Fuse Block Kit
ST Blade Battery Terminal Mount
Fuse Block
Easily add 4 fused circuits to the terminal of a battery.
Provides power to new accessories in your boat or vehicle.
• Mounts on the battery terminal stud
• Screw terminals for securing wires
• Nylon insulated ring terminals included for each screw terminal
• Accepts small format circuit labels
• Ignition Protected—for use in a gasoline engine compartment
• Includes write-on circuit labels
• Includes four 16–14 AWG and four 12–10 AWG Nylon insulated
ring terminals
• Fuses sold separately (page 40)
ST Blade Battery Terminal Mount Fuse Block
Specications
Voltage Max Operating 32V DC
Amperage Max Operating 30A per circuit
Amperage Max Operating 100A per block
Fuse Type ATO
®
or ATC
®
Fuses
Bus Material Tin-Plated Copper C11000
Mounting Thru-hole Clearance for 3/8" [M10] stud
Screw Terminal #8–32 Screws with captive
star lock washer
Regulatory
Meets ISO 8846 and SAE J1171 external ignition
protection requirements
5023-BSS
Nylon insulated
ring terminals
Part # Description
5023-BSS ST-Blade Battery Terminal Mount Fuse Block