Full Product Manual
Table Of Contents

33
DC MANAGEMENT
bluesea.com
3000-BSS
Single Circuit ON-OFF
Switches a single battery to a single load group
3002-BSS
Selector 4 Position
Switches isolated battery banks to all loads
or combines battery banks to all loads
HD Series Battery Switches
Up to 600 Amps continuous
• Tin-plated copper studs for maximum conductivity and corrosion resistance
• Accepts up to 4/0 AWG (120 mm²) battery cables
• Studs accept 1/2" (M12) ring terminals
• 7/8" (22 mm) stud length accepts multiple cable terminals
• Blue Sea Systems one-piece terminal stud design never loosens over time
• One-piece stainless ange nuts ensure safe and secure connections
• Fits most Perko and Guest low amperage battery switch hole patterns
• Case design allows surface or rear mounting options
• Tactile indicator conveys knob position by feel
• Rear or front mounted
• Icon Circuit Identication Label Kit available—sold separately
Specications
3000-BSS 3002-BSS
Cranking Rating: 30 sec 1,750A 1,600A
Cranking Rating: 1 min 1,325A 1,150A
Intermittent Rating: 5 min 900A 700A
Continuous Rating 600A 500A
Voltage Max Operating 32V DC 32V DC
Regulatory
marked, ISO 8846, UL Listed—UL 1107 electric power switches
Meets UL 1500 and SAE J1171 external ignition protection requirements
IP66—protected against powerful water jets
7635-BSS
m
LVD Low Voltage Disconnect
Senses low battery voltage and disconnects non-critical loads to
save power for engine starting
• Status light in both m-LVD and Remote Control Switch provides visual
warning of low voltage state prior to disconnect
• Alarm output for audible warning of low voltage state prior to disconnect
(optional alarm required)
• One-piece stainless ange nuts ensure safe and secure connections
• Remote Control Switch functions:
- Sets desired disconnect voltage
- Temporarily delays circuit disconnect for 10 minutes
- Temporarily disconnects circuits until voltage rises
- Silences alarm (optional alarm required)
• Includes Remote Control Switch
Specications
Intermittent Rating: 5 min 115A
Continuous Rating 65A
Nominal Voltage 12V DC
Cable Size (to meet current ratings) 6 AWG (16mm²)
Terminal Stud Size 1/4"-20 (M6)
Disconnect Voltage 11.3V–12.1V Adjustable
Reconnect Voltage 13V DC
Remote Control Switch Type: SPDT Action: (ON)-OFF-(ON)
( ) = momentary
Regulatory
Meets ISO 8846 and SAE J1171 external ignition protection requirements
Part # Description
7635-BSS
LVD Low Voltage Disconnect
Part # Description
3000-BSS Single Circuit ON-OFF
3002-BSS Selector 4 Position










