Full Product Manual

34
DC MANAGEMENT
park-power.com
Easyt™ Battery Switch
ParkPower
®
has listened to its customers and
has responded to feedback concerning some
installations where switches need to be
recessed through varying thicknesses of panels.
The 700RV Easyt switch achieves this through
an easily removable threaded ring allowing for
panel thicknesses up to 3/4" (19 mm). This
durable switch is designed with a removable key
45° past the o position, labeled handle and a
removable back cover covering exposed
terminals. The switch can also be surface
mounted oering a unique style compared to
other switches available on the market. The
700RV Easyt can easily be retrotted in place
of most European post and lever type switches.
700RV
Contour Heavy-Duty
Master Switch
The Contour Heavy Duty Master switch is rated
at 600 amps continuous and 2500 amps
cranking, it is well suited for higher power loads.
The 720RV can be recessed or surface mounted.
The 720RV also includes the same style
removable side plates and back plate as the
701RV series.
720RV
Battery Master Switches
Unique to the Chassis and House Battery
Master Switches is the patented contour lock
system, allowing the switches to be used as
stand alone units, or locked together with other
switches. The switches also feature a control
knob which cannot be removed while in the ON
or OFF position, but it can be removed by
switching to an anti-clockwise 45° position. The
switches also feature removable side plates on
4 sides for access of up to 1/0 cables plus a rear
cover insulating the rear terminals against any
short circuits.
701CHRV
Chassis battery
701HBRV
House battery
Specications:
• Continuous Rating: 275A DC
• Intermittent Rating: 455A DC
• Cranking Rating: 1250A DC
• Voltage Rating: 48V DC
• Operation: On / O
• Recessed or Surface Mount
• Ignition Protected
• Termination Stud Size: 3/8" (2 x 10 mm)
• Dimensions: 2.75 x 2.75 x 3" H
(69 x 69 x 75 mm H)
• Tin plated copper studs and nuts
Specications:
• Continuous Rating: 275A DC
• Intermittent Rating: 455A DC
• Cranking Rating: 1250A DC
• Voltage Rating: 48V DC
• Operation: On/O
• Mounting: Recessed via 7/8" hole
or Surface
• Termination Stud Size: 3/8" (2 x 10 mm)
• Tin plated copper studs and nuts
• Ignition protected
Specications:
• Continuous Rating: 600A DC
• Intermittent Rating: 800A DC
• Cranking Rating: 2500A DC
• Voltage Rating: 48V DC
• Operation: On / O
• Recessed or Surface Mount
• Ignition Protected
• Termination Stud Size: 1/2" (2 x 12 mm)
• Dimensions: 1 x 2.75 x 3" H
(102 x 102 x 90 mm H)
• Tin plated copper studs and nuts
701HBRV
701CHRV