User Manual
Table Of Contents
- 1.0 Introduction
- 2.0 Wiring Diagram
- 3.0 Testing
- 4.0 TROUBLESHOOTING
- 5.0 CARE AND MAINTENANCE
- 6.0 USING CONTROLLER TO CHANGE OUTPUT RESOLUTION
- 6.1 "QUICK CHANGE" DEFAULT SETTINGS
- 6.2 MENU CHANGE INSTRUCTIONS
- 6.3 Change the Default Mirror Image to Real Image (To use camera as forward facing or use with DVR).
- 6.4 HYBRID CAMERA
- 6.5 setting up the menu
- 6.6 LENS
- 6.7 EXPOSURE
- 6.8 BACKLIGHT
- 6.9 WHITE BALANCE
- 6.10 BLACK AND WHITE IMAGE
- 6.11 NR (Noise Reduction)
- 6.12 ADJUST
- 6.13 EXIT
- 7.0 CARE AND MAINTENANCE
- 8.0 Warranty Terms & Conditions
- 9.0 NOTES
32
1.0 INTRODUCTION
Thank you for purchasing Parkmate’s PM-81HYR camera. We
are certain that our product will give you trouble-free operation
while providing you with safety features that enhance your driving
experience.
DISCLAIMER
Our products are to assist and aid the driver, not to replace the
manual function of the person operating the vehicle.
Although the PM-81HYR is a visual aid and will allow you to view
what is behind the vehicle, it does not remove the responsibility
of driving the vehicle from the driver. Legal responsibility and
safe driving practise remains with the driver at all times. You have
purchased this product with the understanding that its use is as
an aid only. We highly recommend that you have this product
professionally installed to ensure that it will provide the functions it
is set out to perform.
CAUTION
• Ensure you are using your rear camera within your countries’
road laws. Please make sure you are familiar with your local
road legislation before use.
1.1 COMPONENT LIST
IMPORTANT NOTICE
• Please read this manual carefully before using the product.
• Wire connection points should always be insulated.
• Wiring should always be installed away from heat sources and
electrical components.
10 Metre
Extension Cable
RCA
Adaptor
PM-81HYR
Rear Camera
Screws
+ Allen Key
Camera
Progamming
Module
• Please perform tests after nishing installation to ensure
camera is working correctly.
• This camera is intended for use as an aid when reversing
your vehicle. Drivers must always use extreme caution when
operating a vehicle.
• Specications are subject to change without notice.
WARNING
• Do not disassemble the camera or cut the camera cable
as this voids the warranty. Disassembling the camera will
compromise the waterproof seal.
1.2 TECHNICAL SPECIFICATIONS:
Signal System: NTSC / PAL
Horizontal Resolution:
900 TVL / 960 AHD
Minimum Illumination: 0.0 Lux
Diagonal Angle: 150°
Waterproof Rating: IP
69K
Nominal Voltage:
12V/24V
Working Temperature: -30°C to 85°C
2.0 WIRING DIAGRAM
Front view option: PM-81HYR functions as a rear view camera
as standard.
12
V
+