User Manual
Table Of Contents
- 1.0 Introduction
- 2.0 Wiring Diagram
- 3.0 Testing
- 4.0 TROUBLESHOOTING
- 5.0 CARE AND MAINTENANCE
- 6.0 USING CONTROLLER TO CHANGE OUTPUT RESOLUTION
- 6.1 "QUICK CHANGE" DEFAULT SETTINGS
- 6.2 MENU CHANGE INSTRUCTIONS
- 6.3 Change the Default Mirror Image to Real Image (To use camera as forward facing or use with DVR).
- 6.4 HYBRID CAMERA
- 6.5 setting up the menu
- 6.6 LENS
- 6.7 EXPOSURE
- 6.8 BACKLIGHT
- 6.9 WHITE BALANCE
- 6.10 BLACK AND WHITE IMAGE
- 6.11 NR (Noise Reduction)
- 6.12 ADJUST
- 6.13 EXIT
- 7.0 CARE AND MAINTENANCE
- 8.0 Warranty Terms & Conditions
- 9.0 NOTES
1918
3. Up to 15 letters are available for the CAM TITLE.
- Move the cursor to the letters by using the UP and DOWN
selections.
- Set an ID from 0-9, A-Z by using the UP, DOWN, LEFT and
RIGHT selections.
- Lock in the letters by using the button. When the letter is
locked in, the cursor will move to the next space.
- Repeat the above to input CAM TITLE.
4. When a name has been chosen, please select a position for
the name to display.
- Move the cursor onto POS and then press the button.
- The name will appear at the top right corner.
- Find the position you wish to display the name by using the 4
directional selections, and then press the button to nish.
5. Select END, press button to complete CAM TITLE input.
2. D-EFFECT:
- FREEZE: You can view still or moving pictures.
- MIRROR: ROTATE / V-FLIP / MIRROR / OFF.
- NEG. IMAGE: Negative ON / OFF
- RETURN: Return to SPECIAL MENU or SAVE & EXIT.
☞
①
②
③
④
①
②
③
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
►
►
▶
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. LANGUAGE
6. DEFECT
7. RETURN
ON
OFF
OFF
ENG
RET
SPECIAL
►
☞
①
②
③
④
①
②
③
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
►
►
▶
►
►
1. FREEZE
2. MIRROR
3. NEG . IMAGE
4. RETURN
OFF
OFF
OFF
RET
D-EFFECT
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
3. MOTION
- SELECT: You can select up to 4MD areas.
- DISPLAY: Determines whether to use the MD area selected
in AREA SELECT.
ON: Determines the coordinate of the vertical / horizontal
position and size.
- SENSITIVITY: Determines the coordinate of sensitivity.
- COLOUR: GREEN, RED, WHITE and BLUE.
- TRANS: Set the colour transparency for displaying a
detected area.
- ALARM: Set the alarm output (VIEW TYPE, OSD VIEW, etc)
- DEFAULT: Initialize all setting of the MOTION.
- RETURN: Return to SPECIAL MENU or SAVE & EXIT.
4. PRIVACY
☞
①
②
③
④
①
②
③
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
►
►
▶
►
►
►
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. LANGUAGE
6. DEFECT
7. RETURN
OFF
OFF
OFF
ENG
RET
SPECIAL
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
☞
①
②
③
④
①
②
③
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
►
►
▶
►
►
►
AREA1
OFF
30
BLUE
1.00
TIME
RET
►
1. SELECT
2. DISPLAY
3. SENSITIVITY
4. COLOR
5. TRANS
6. ALARM
7. DEFAULT
8. RETURN
MOTION
||||||||||||||||||||
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
☞
①
②
③
④
①
②
③
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
►
►
▶
►
►
►
►
►
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. LANGUAGE
6. DEFECT
7. RETURN
OFF
OFF
OFF
ENG
RET
SPECIAL
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►