PM-81HYR Heavy Duty Hybrid Camera with AHD and TVL Resolution USER MANUAL YOUR SAFETY COMES FIRST™
CONTENTS 1.0 2.0 3.0 INTRODUCTION .............................................................................2 1.1 COMPONENT LIST ..............................................................2 1.2 TECHNICAL SPECIFICATIONS:...........................................3 WIRING DIAGRAM .........................................................................3 TESTING .........................................................................................4 3.1 HOW TO TEST ..............................
1.0 INTRODUCTION • Please perform tests after finishing installation to ensure camera is working correctly. • This camera is intended for use as an aid when reversing your vehicle. Drivers must always use extreme caution when operating a vehicle. DISCLAIMER • Specifications are subject to change without notice. Our products are to assist and aid the driver, not to replace the manual function of the person operating the vehicle. WARNING Thank you for purchasing Parkmate’s PM-81HYR camera.
5.0 PM-81HYR cable harness and programmer To Monitor CAM 6.0 12V + The camera programming module has to be connected with the camera connector as shown in above figure. RIGHT BUTTON NOTE : Please note AHD output will only work with AHD compatible monitors. CVBS output can work with both AHD and CVBS compatible monitors. MENU BUTTON DOWN BUTTON UP LEFT RIGHT DOWN 6.1 Programming Module Image 3.0 TESTING 3.1 HOW TO TEST 4.0 1. Apply the parking brakes. (Safety Precaution) 2.
㻌 4. 6.3 Press DOWN key to reach menu option RETURN, Press OK key to return to MAIN MENU. Using UP and DOWN key reach to menu option SAVE & EXIT, press the OK key which will save the settings and will navigate out of the programming menu. CHANGE THE DEFAULT MIRROR IMAGE TO REAL IMAGE (TO USE CAMERA AS FORWARD FACING OR USE WITH DVR). 1. Press the OK key to enter into MAIN MENU. 2. Press UP and DOWN key to reach menu option 7, SPECIAL and press the OK key which will open sub menu page. 3. 4.
㻌 8 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 NR 㻌 㻌 SPECIAL 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 ADJUST 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌EXIT 㻌 㻌 㻌 㻌 㻌 㻌 㻌 6.5 㻌 㻌 2DNR HIGH, MIDDLE, LOW, OFF 3DNR HIGH, MIDDLE, LOW, OFF CAM TITLE ON / OFF D-EFFECT FREEZE ON / OFF MIRROR ROTATE / V-FLIP / MIRROR / OFF NEG.
- ► 6.6 - LENS 1. 2. DC - ► OFF ATW AUTO - 2. EXPOSURE 1. SHUTTER ►2. AGC 3. SENS-UP 4. BRIGHTNESS 5. D-WDR 6. DEFOG 7. RETURN DC - When DC IRIS lens is used 3. You can select the MAX SHUTTER from 1/60 to 1/50,000 sec ► (NTSC), and 1/50 to 1/50,000 sec (PAL). INDOOR |||||||||||||||||||| RET 8 ►1. MIN SHU 2. MAX SHU 3. RETURN 1/30 FLK RET - IRIS SPEED: Adjusts the IRIS SPEED 0 ~ 15. ► - ► 1. OFF ATW AUTO SAVE&END EXPOSURE ►1. SHUTTER 2.►AGC 3. SENS-UP 4. BRIGHTNESS 5. D-WDR 6.
5. - - DEFAULT: Initialize all settings of the defog. ► -D-WDR (Digital Wide Dynamic Range) - D-WDR Function scans both dark and bright clearly. This model achieves its best ► set up for different levels of backlit or contrast lighting situations. ► -- EXPOSURE 1. SHUTTER 2. AGC 3. SENS-UP 4. BRIGHTNESS ►5. D-WDR 6. DEFOG 7. RETURN - - -- ► - RETURN: Return to EXPOSURE or SAVE & EXIT. 7. ► - RETURN: Return to the MAIN MENU or SAVE & EXIT.
-- ► ► - number HSBLC - Can mask the head lights to view car license plates more clearly. ECLIPSE MASKING AREA ► 2. 6.9 ► ► ► - ► MAIN MENU ECLIPSE ON - ECLIPSE OFF MAIN MENU ► - ► 1. LENS 2. EXPOSURE 3. BACKLIGHT ►4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9. EXIT ► ► 1. LENS 2. EXPOSURE ►3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST 9.
- If one or more values of each OPD Block are included in the ATW area, the colour temperature is fixed by the corresponding OPD data. Otherwise, it becomes fixed by all the OPD data. Noise Reduction (NR) is used in order to obtain a high quality output image and enhance compression efficiency. Offers Edge Preserving 2D NR and Motion Adaptive 3D NR. MAIN MENU - 6.11 NR (NOISE REDUCTION) 6.10 BLACK AND WHITE IMAGE You can display pictures in colour or black / white. 1. LENS 2. EXPOSURE 3.
- ▶ 3. Up to 15 letters are available for the CAM TITLE. 2. ► - Move the cursor to the letters by using the UP and DOWN selections. - and - Set an ID from 0-9, A-Z by using the UP, DOWN, LEFT RIGHT selections. - Lock in the letters by using the button. When the letter - is locked in, the cursor will move to the next space. - Repeat the above to input CAM TITLE. 4. When a name has been chosen, please select a position for the name to display.
☞ - - ► SELECT: You can select up to 4 PRIVACY areas. ► PRIVACY ► 1. SELECT ►2. DISPLAY 3. COLOR 4. TRANS 5. DEFAULT 6. RETURN ▶ AREA1 OFF 0 3 RET ▶ ▶ ► - -- DISPLAY: Determines whether to use the MD area selected in ► ① AREA SELECT. - GREEN, YELLOW, BLUE, RED, WHITE, ② COLOUR: CYAN, ► WHITE and USER. - ③ TRANS: Set the colour transparency for displaying a detected - ► area. - ▶ ④ - DEFAULT: Initialize all setting of the PRIVACY.
► ► - - - RETURN: Return to SPECIAL MENU or SAVE & EXIT. ► ► 7. ► A. LCD RETURN: Return to MAIN MENU or SAVE & EXIT. - GAMMA: Adjust LEVEL 0.45 ~ 1.00, USER. ► 6.12 ADJUST ► DC 1. LENS 2. EXPOSURE 3. BACKLIGHT 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL ►8. ADJUST 9. EXIT - - - - - END AGC: Set to 255 level for optimised definition at - night. - RETURN:►Return to ADJUST MENU or SAVE & EXIT. ► ADJUST ► SHARPNESS ►1. LEVEL 2. START AGC 3. END AGC 4.
► 5. OUT. MODE 8.0 ADJUST 1. SHARPNESS 2. MONITOR 3. LSC 4. VIDEO.OUT ►5. OUT. MODE 6. RETURN 6. AUTO LCD OFF NTSC AHD RET RETURN: Return to MAIN MENU or SAVE & EXIT. ► If the version of DVR is 1.0, DISTANCE menu is added. DISTANCE menu enables to choose NORMAL or LONG depending on length of cable. 6.13 EXIT MAIN MENU 1. LENS 2. EXPOSURE 3. BACKLIGHT ► 4. WHITE BAL 5. DAY&NIGHT 6. NR 7. SPECIAL 8. ADJUST ►9. EXIT 7.
INDEMNITY YOU AGREE TO DEFEND, INDEMNIFY AND HOLD HARMLESS PARKMATE AND ITS SUBSIDIARIES AND AFFILIATES FROM AND AGAINST ANY AND ALL CLAIMS, PROCEEDINGS, INJURIES, LIABILITIES, LOSSES, COSTS AND EXPENSES (INCLUDING REASONABLE LEGAL FEES), INCLUDING BUT NOT LIMITED TO, CLAIMS ALLEGING NEGLIGENCE, INVASION OF PRIVACY, COPYRIGHT INFRINGEMENT AND/ OR TRADEMARK INFRINGEMENT AGAINST PARKMATE AND ITS SUBSIDIARIES AND AFFILIATES OR THE PARKMATE SERVICES, RELATING TO OR ARISING OUT OF YOUR BREACH OF ANY PROVISION OF
NO GUARANTEE OR WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, THAT THE PARKMATE EQUIPMENT AND SERVICES PROVIDED WILL DETECT OR AVERT SUCH INCIDENTS OR THEIR CONSEQUENCES. PARKMATE DOES NOT UNDERTAKE ANY RISK THAT YOU OR YOUR VEHICLE OR PROPERTY, OR THE PERSON OR PROPERTY OF OTHERS, MAY BE SUBJECT TO INJURY OR LOSS IF SUCH AN EVENT OCCURS. THE ALLOCATION OF SUCH RISK REMAINS WITH YOU, NOT PARKMATE.
9.
32 33
V1.0 All Images, Information and Content are Copyright © 2020 Directed Electronics Australia Pty Ltd. All Rights Reserved. www.parkmate.com.au | www.parkmatehd.co.nz www.directed.com.au www.directed.co.
