Brochure

Parker Hannifin Corporation
Climate & Industrial Controls Group
Cleveland, OH
Catalog CIC-2003-1/US
Accumulators, Receivers, Tanks and Mufflers
68
Compensator Tanks
A compensator tank is a mode dependent
receiver that can be used in a heat pump
system. As the heating mode does not require
as much refrigerant as the cooling mode, the
compensator tank stores the excess refrigerant.
Features and Benefits
• Available with 5/8", 3/4" and 7/8" suction
line connections — steel or copper sweat.
• Liquid connections - steel or copper sweat.
• Diameters of 3", 3 1/2" and 4" available.
• Various holding capacities available.
• Corrosion resistant paint gives 500 hour
salt spray protection.
• U.L. listed SA5915.
Dimensions
Compensator Tank
Refrigerant Holding Capacities
Technical Information and Dimensions Compensator Tanks
Model A B C
Suction
Connections
Liq. Line
Fitting
PR-3083-8-7C 8.25 13.00 3.00 7/8 I.D. x 7/8 O.D. 1/4 O.D.
PR-3083-16-7C 16.00 21.25 3.00 7/8 I.D. x 7/8 O.D. 1/4 O.D.
PR3083-12-6C 12.00 16.00 3.00 3/4 I.D. typ. 1/4 I.D.
PR-35083-9-7C 9.38 14.55 3.50 7/8 I.D. x 7/8 O.D. 3/8 O.D.
PR-35083-4-7C 4.28 8.93 3.50 7/8 I.D. x 7/8 O.D. 3/8 O.D.
22 134a 410A
PR3083-8-7C 45 29.60 30.06 26.35
PR3083-16-7C 89 58.55 59.46 52.12
PR3083-12-7C 66 43.42 44.09 38.65
PR35083-9-7C 72 47.37 48.10 42.17
PR35083-4-7C 31 20.39 20.71 18.16
Densities
at 100°F in lb/ft
3
- 71.05 72.15 63.25
Holding Capacities (oz.)
Model
Int. Volume
In.
3