Brochure

Catalog CIC-2003-1/US
Pre-Filters, Oil Devices and Strainers
Parker Hannifin Corporation
Climate & Industrial Controls Group
Cleveland, OH
51
Pre-Filters,
Oil Devices
& Strainers
Technical Information PF Series, SPD Series, LP Gas Filter
Filters and Pre-Filters
Parker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from
the many types of contaminants that are encountered during the servicing of systems.
Specifications
For LP Gas Filter, consult factory for
inlet/outlet data and part numbers.
Specifications
PF Series
The PF 052 & PF 052MF are designed to provide a filtration level
of 15 microns. When installed on the inlet of your machine it can
prevent costly damage by filtering solid contaminants out of the
refrigerant before it enters your machine. The Parker pre-filter is
for temporary use only and should be changed after servicing a
maximum of six to eight systems. Change out may be needed
sooner depending on actual system conditions. Various fitting
combinations are available.
Features and Benefits
• Female outlet fitting allows direct mounting to the machine.
• Extended female end fitting provides valve handle clearance.
• Male-to-male fittings allow connection to or between hoses.
• Enlarged depth filtering area.
• UL listed / CSA certified.
SPD Series
The SPD series is an enlarged version of the PF Series with drying
capabilities. This Super Pre-Filter-Dryer should be installed at the
inlet of the machine and used where there are concentrations of
contaminants in the refrigerant. Moisture capacity of this unit size
exceeds anything else currently available in the market. The Super
SPD series is the ideal solution when transferring large amounts of
refrigerant for reclaim or recycle.
Features and Benefits
• Super high capacity for acid and moisture removal.
• Removes 504 drops of moisture vs. industry standard of 150
drops.
• Available with either 1/4" SAE or 3/8" SAE flare connections.
• Compatible with all HCFC, CFC and other refrigerants and
blends.
LP Gas Filter
Additives to LP gas can cause scaling and flaking of copper and
aluminum tubing over a period of time. The Parker LP Gas Filter
effectively removes these contaminants
Features and Benefits
• Special paint meets U.L. requirements for gas appliances.
Model Inlet Outlet
SPD-162 1/4" SAE male flare 1/4" SAE male flare
SPD-162MF 1/4" SAE male flare 1/4" SAE female flare
SPD-163 3/8" SAE male flare 3/8" SAE male flare
Model Inlet Outlet
PF 052 1/4" SAE male flare 1/4" SAE male flare
PF 052MF 1/4" SAE male flare 1/4" SAE female flare
Specifications