Brochure

Parker Hannifin Corporation
Climate & Industrial Controls Group
Cleveland, OH
Catalog CIC-2003-1/US
Filter Dryers
42
Bi-Flow Dryer Flow Capacity — Tons of Refrigerant at Pressure Drop 1 PSI
Technical Information Bi-Flow Dryers, Gold Label Steel Suction Line Filter Dryers
Model
No.
Filter Area
cu inches R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A
BF082S 1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4
BF083S 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
BF084S 10.4 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
BF083 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
BF084 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
BF162S 1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4
BF163S 2.2 2.9 2.6 3.0 3.0 2.6 2.0 2.3 1.9 2.5 2.0 2.8 2.9 1.9 1.9
BF164S 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
BF165S 14.4 3.7 4.9 4.5 5.1 5.1 4.5 3.3 3.9 3.2 4.3 3.5 4.8 4.9 3.2 3.2
BF163 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8
BF164 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3
BF163S-XF 2.7 3.6 3.3 3.7 3.7 3.3 2.4 2.8 2.3 3.1 2.5 3.5 3.5 2.3 2.3
Gold Label Steel Suction Line Filter Dryers
“ The Original SLD
®
”
Parker Hannifin developed and introduced the solid-core clean-up dryer for
use in a system suction line. The compact design incorporates a large outside
diameter shell, which results in a shorter lay-in length, and a larger core,
which provides a greater filtration area for maximum operating efficiency.
The core material has controlled porosity which effectively removes and holds
a maximum amount of contaminants with a minimum of pressure drop. In
addition, the core material collects and holds inorganic acids and other harm-
ful contaminants present after a motor burnout. The special binding process
protects the core from acid decomposition.
Access valves on both the inlet and outlet sides make it easy to measure
pressure accurately. Occasionally, enough contaminant matter may collect in
the filter core to cause a slight pressure drop. The access valves on the SLD
make it easy to determine if a pressure drop exists and to measure the
amount of the drop.
Features and Benefits
• The original SLD
®
, solid core, activated alumina
suction line filter dryer.
• High acid capacity.
• Low pressure drop — exceptionally high flow
rates.
• Designed for system clean-up.
• 500 hours salt spray protection.
• Shortest system cut-out lengths allow
installation in tight areas.
• Two access valves simplify pressure drop
measurement.
• Flare or solid copper sweat fittings.
• UL listed — File No. SA3441.
CSA listed LR46423.