Brochure

Parker Hannifin Corporation
Climate & Industrial Controls Group
Cleveland, OH
118
Catalog CIC-2003-1/US
Service and Check Valves
Flow DataSpecifications
* Due to the numerous manufacturers of refriger-
ant oils and continuous changes of additives,
compatibility can not be guaranteed. Please
contact Parker for compatibility of refrigerants
and refrigerant oils not listed.
Technical Information
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.08
0.90
1.00
Pressure Drop vs. Mass Flow
Refrigerant R22
40°F Saturated Suction with 10°F Superheat
Pressure Drop (psi)
Refrigerant Mass Flow (Lbs/Hr)
Key:
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 28000
5/8" Body, 5/8" Copper Sweat Connections
5/8" Body, 3/4" Copper Sweat Connections
7/8" Body, 7/8" (Factory) and 1-1/8" (Field) Copper Sweat Connections
7/8" Body, 7/8" Copper Sweat Connections
7/8" Body, 3/4" Copper Sweat Connections
1-1/8" Body, 1-1/8" or 1-3/8" (Factory) and 1-3/8" (Field) Copper Sweat Connections
1-1/8" Body, 1-1/8" Copper Sweat Connections
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.08
Pressure Drop vs. Mass Flow
Refrigerant R410a
40° F Saturated Suction with 10° F Superheat
Pressure Drop (psi)
Refrigerant Mass Flow (Lbs/Hr)
Key:
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 28000
5/8" Body, 5/8" Copper Sweat Connections
5/8" Body, 3/4" Copper Sweat Connections
7/8" Body, 7/8" (Factory) and 1-1/8" (Field) Copper Sweat Connections
7/8" Body, 7/8" Copper Sweat Connections
7/8" Body, 3/4" Copper Sweat Connections
1-1/8" Body, 1-1/8" or 1-3/8" (Factory) and 1-3/8" (Field) Copper Sweat Connections
1-1/8" Body, 1-1/8" Copper Sweat Connections
RB01 Series Ball Valves
PRODUCT RB01 Series Ball Valves
Operating
Temperature Range
-40° F to +250°F (-40° C to +121° C)
Operating
Pressure Range
Vacuum to 750 psi
Minimum
Burst Pressure
3,000 psi (207 bar)
MATERIALS
Valve Body Brass per ASTM B16, Alloy C36000
Ball Brass per ASTM B16, Alloy C36000
Connections Wrought Copper, per ASTM-B75,
Alloy C12200
Valve Stem Zinc Plated Steel
Valve Stem Seal Neoprene™ “W” Type O-Ring
Ball Seat Polyphenylene Sulphide
Ball Seal PTFE or TFM
Valve Stem Cap Brass per ASTM B16, Alloy C36000
Gauge Port Cap Brass per ASTM B16, Alloy C36000
Gauge Port
Valve Seals
PTFE and Neoprene™
Mounting
Post or Pad
Brass per ASTM B16, Alloy C36000
MATERIAL COMPATIBILITY*
Vibration
Resistance
Complies with UL 109
Material Strength Complies with UL207
(Moist Ammonia Test)
External Leak Rate < 0.1 ounce of R22 refrigerant per
year at 150 psi
<0.25 ounce of R22 refrigerant per
year at 600 psi with ball closed and
valve stem cap removed
All components, including valve stem O-Ring seal, ball
seat and ball seal, are generally compatible with the
following refrigerants and refrigerant oils:
R22 & mineral oil, alkylbenzene oil, or polyolester oil
R134a, R404a, R407c, R410a or R507 & polyolester oil