Instructions / Assembly

4011 Avenida de la Plata, Ste. 302, Oceanside, CA 92056 ● www.YourGaragePro.com
[phone] ● [phone] ● Fax [phone] ● Email: [e-mail]
Please read before using the Tire Savers
™
Customer Instructions:
1. Park your vehicle in the desired location.
2. Back your vehicle up approximately 6" to 8".
3. Before placing the Tire Savers
™
on the floor, sweep away all dirt and
debris.
4. Slide each Tire Saver in front of the vehicle's tires until they touch
the tire, centering the Tire Saver with the vehicle's tire.
5. Slowly drive up onto the Tire Savers. You will feel your vehicle drive
up over the first hump and settle down onto the Tire Saver.
Caution:
• Always drive your vehicle onto and off of the Tire Savers slowly.
• Turning your tires while on the Tire Savers can cause the Tire
Savers to move. Try to avoid this when driving onto and off of the
Tire Savers.
Warning:
This device is designed to prevent flat spots from forming on your tires
only. It is NOT designed or intended to stop a vehicle or tire from moving
in any way.
Lifetime Warranty:
GaragePro offers a lifetime warranty to the original retail purchaser of the
Park Smart
®
Tire Savers
™
. GaragePro will, upon proof of purchase, repair
or replace any defective Tire Savers free of charge. The original retail
customer is responsible for returning and paying for all freight charges to
return product to GaragePro.