Product Info
Table Of Contents
- Foreword
- Copyright and trademarks
- Restrictions on use
- Health and safety
- CE type approval
- Park Air Sapphire
- Park Air V2 Services
- About this user documentation
- Glossary of abbreviations, acronyms and technical terms
- 1 Overview
- 2 Description
- 3 Installation
- 4 Amplifier/radio interaction
- 5 Maintenance
- 6 Connector information
- 7 Specification
- 8 Associated equipment
- 9 Fault finding
- Annex
T6-D-USER-AV100-EN Page 5-2 Maintenance
© Park Air Systems Limited 2020
(7) Check the heatsink cooling fins for blockages.
(8) Connect the new fan/screen assembly.
Note:
The fan/
screen assembly must be replaced with the same type.
Note the cable and f
an position:
(9) I
nsert the new fan/screen assembly into the rear of the amplifier.
(10) F
asten the fan/screen assembly with the eight (8) fixing screws.
(11) I
nstall the amplifier to the cabinet (if applicable).
(12) C
onnect all the cables.
(13) S
witch on the amplifier.
The amplifier continually checks the correct function of the fan.
Clip-on connectors
Cable position
Fan markings