Product Info

Table Of Contents
T6-D-USER-AV100-EN Page 5-1 Maintenance
© Park Air Systems Limited 2020
5 Maintenance
5.1 Fan replacement
Note:
Individual fan replacement is not recommended. In the event of a fan failure the fan/screen assembly
must be replaced with genuine Park Air parts.
To replace the fans
:
(1) Switch off the amplifier.
(2) D
isconnect all cables from the amplifier.
(3) R
emove from the equipment cabinet (if applicable).
On the rear of the a
mplifier:
(4) W
ith a T10 Torx® screwdriver remove the eight (8) fixing screws.
(5) R
emove the fan/screen assembly from the rear of the amplifier.
(6) D
isconnect the fan connectors.
No user serviceable parts inside the amplifier
There are no user serviceable parts inside the amplifier.
Double pole/neutral fusing
The amplifier uses a power supply which has both live and neutral fuses.
Fan replacement
Fan replacement must be done by a skilled person.
AC and/or DC supply
The power cables are the amplifier’s disconnect devices.
Screws
Screws