Product Info
Table Of Contents
- Foreword
- Copyright and trademarks
- Restrictions on use
- Health and safety
- CE type approval
- Park Air Sapphire
- Park Air V2 Services
- About this user documentation
- Glossary of abbreviations, acronyms and technical terms
- 1 Overview
- 2 Description
- 3 Installation
- 4 Amplifier/radio interaction
- 5 Maintenance
- 6 Connector information
- 7 Specification
- 8 Associated equipment
- 9 Fault finding
- Annex
T6-D-USER-AV100-EN Page 4-4 Amplifier/radio interaction
© Park Air Systems Limited 2020
4.2.3 Status
This is the operational status of the radio. To find Status:
(1) S
elect
(2) S
croll so that Status is shown in the middle parameter field.
To enter the status list:
(1) P
ush
The status list screen is shown:
Note:
Status list screen will display “REDUCED SERVICE” if a fault is detected. See 9 Fault finding.
To select Status Messages, Monitoring or Status Reset:
(1) S
croll as necessary.
(2) P
ush
To go back to the menu screen:
(1) S
elect
To go back to the home screen:
(1) S
elect