Product Info
Table Of Contents
- Foreword
- Copyright and trademarks
- Restrictions on use
- Health and safety
- CE type approval
- Park Air Sapphire
- Park Air V2 Services
- About this user documentation
- Glossary of abbreviations, acronyms and technical terms
- 1 Overview
- 2 Description
- 3 Installation
- 4 Amplifier/radio interaction
- 5 Maintenance
- 6 Connector information
- 7 Specification
- 8 Associated equipment
- 9 Fault finding
- Annex
T6-D-USER-AV100-EN Page 3-4 Installation
© Park Air Systems Limited 2020
3.2.2 Connect the cables
If the amplifier is fitted to a wired position in the cabinet, the amplifier control cables are wrapped together.
(1) C
onnect the RJ45 cables as applicable, see 2.3 Antenna configurations. The cables are colour-coded.
(2) C
onnect the RF cable/s.
(3) Connect the AC and /or DC supply cables.
The amplifier can be powered when the cabinet installation is complete or when decided by a suitably qualified
p
erson.
3.2.3 Amplifier removal
To remove an amplifier from a C4 Cabinet:
(1) R
emove the cables in the opposite order to 3.2.2 Connect the cables.
(2) R
emove the amplifier from the cabinet in the opposite order to 3.2.1 Tool-free installation.
RJ45 cable colour RJ45 connection
Yellow FAC
Green AMP (Radio A)
Green AMP (Radio B)