Product Info
Table Of Contents
- Foreword
- Copyright and trademarks
- Restrictions on use
- Health and safety
- CE type approval
- Park Air Sapphire
- Park Air V2 Services
- About this user documentation
- Glossary of abbreviations, acronyms and technical terms
- 1 Overview
- 2 Description
- 3 Installation
- 4 Amplifier/radio interaction
- 5 Maintenance
- 6 Connector information
- 7 Specification
- 8 Associated equipment
- 9 Fault finding
- Annex
T6-D-USER-AV100-EN Page 2-1 Description
© Park Air Systems Limited 2020
2 Description
The T6 VHF Amplifier interfaces are shown in this section.
2.1 Front panel interfaces
2.1.1 On/off switch
Note:
This action symbol is used in the document.
2.1.2 Power supply indicator
Note:
These action symbols are used in the document.
Control Notes
On/off switch Front panel on/off of the amplifier See 2.1.1 On/off switch
Power supply indicator Connected power source types See 2.1.2 Power supply indicator
Fault indicator display Fault code icons See 2.1.3 Fault indicator display
Busy indicator Transmitting when illuminated See 2.1.4 Busy indicator
Status indicator Ready or reduced service s
tatus See 2.1.5 Status indicator
Control Notes
On/off switch The power cables are the power disconnect devices.
Power supply
indicator
Function Notes
AC power supply
connected
The AC indicator illuminates amber
The amplifier requires two separate AC power supplies
DC power supply
c
onnected
The DC indicator illuminates amber
The amplifier requires two separate DC power supplies
Status indicator
Power supply indicators
On/off switch
Fault indicator display
Busy indicator