User's Manual

M7X and M7R Page viii
Contents (continued)
Page
Operation
Introduction 3-2
Switching On 3-3
Control Head Key Functions 3-4
Tuning the Radio 3-7
Waveform Profiles 3-8
Frequency Presets 3-9
Log In if Security is Applied 3-10
Tuning Using the Current Waveform Profile 3-12
Tuning by Recalling a Stored Waveform Profile 3-14
Tuning by Recalling a Stored Frequency Preset 3-17
Front Panel Display for 25 kHz and 8.33 kHz Channel Spacing 3-19
Front Panel Display for 25 kHz and 12.5 kHz Channel Spacing 3-20
Maritime Channels 3-21
Configuring the Radio 3-22
Select Between Transceiver, Transmitter or Receiver Operation 3-27
Restricting the Radio’s Frequency Range 3-29
Creating and Storing a Waveform Profile 3-32
Creating and Storing a Frequency Preset 3-36
Security 3-40
Installation
Warnings and Cautions 4-2
Introduction 4-4
Initial Inspection of the Radio 4-4
Fit the Radio into an Equipment Cabinet 4-5
Extending the Control Head 4-7
Selecting the Required Antenna Option 4-9
M7X Transceiver 4-9
M7R Receiver 4-9
Changing the Configuration 4-10
Connecting the Antenna(s) 4-12
Connect the Chassis Stud 4-13
Connecting the Input Supply 4-13
Connecting the dc Input Supply 4-14
Connecting the ac Input Supply 4-15
Control Head Interfaces 4-16
Microphone/Headset/Maintenance Connector 4-16