User's Manual

M7X and M7R Page 3-34 Operation
Back to Menu
Fig 3-37 Select Waveform
(6) Pressing Key 9 to scroll up, or Key 10 to scroll down, highlight the required waveform, then press
Key 13 – Select. You are returned to the Waveform Profile Edit screen (Fig 3-35).
(7) The radio settings that are stored as part of the waveform profile should now be set. This is
achieved by pressing Key 4 – Change to display the Waveform Profile Edit Settings screen
(Fig 3-38).
(8) Pressing Key 9 to scroll up, or Key 10 to scroll down, highlight any parameter that requires editing
and press Key 13 – Change. The parameters associated with a waveform profile depends on the
selected waveform; Table 3-5 shows the radio’s waveform profile parameters that are stored
when operating in AM-Voice and Maritime modes.
(9) Press Key 9 or Key 10 to edit the parameter’s value; then press Key 13 – Store.
(10) Repeat steps (8) and (9) to change other parameters.
Fig 3-38 Waveform Profile Edit Settings Screen
(11) When all settings have been made, press Key 5 – Home. The waveform profile is now ready for
use.