User's Manual

M7X and M7R Page 3-33 Operation
Back to Menu
Fig 3-35 Waveform Profile Edit Screen
(3) The first parameter that can be changed is the Name. A waveform profile can have any name up
to eight characters long. In this example, the default designation WP1 is being changed to
‘AMV50W’ as shown in Fig 3-36 (AMV50W meaning AM-Voice with 50 watt output). To change
the name, press Key 2 – Change. The new name can be entered using the alphanumeric key
pad.
(4) When the new name has been entered, press Key 13 – Select. You are returned to the Waveform
Profile Edit screen (Fig 3-35).
Fig 3-36 Edit Waveform Profile Name
(5) The required waveform should now be selected by pressing Key 3 – Change. This action
displays the Select Waveform screen as shown in Fig 3-37.
Note:
The waveform cannot be changed if the waveform profile is currently
selected. In this case, the waveform change key is greyed out as
shown in this illustration.