User's Manual

M7X and M7R Page 3-32 Operation
Back to Menu
Creating and Storing a Waveform Profile
A waveform profile is a set of instructions stored in the radio to define a mode of operation and certain
parameters associated with the mode as described on page 3-8. Up to 20 different waveform profiles can
be stored in the radio. The factory default profiles are designated ‘WP1’ to ‘WP20’.
To create and store a waveform profile:
(1) From the Home screen (Fig 3-33) press Key 3 to display the list of waveform profiles (Fig 3-34).
Fig 3-33 Home Screen
(2) Pressing Key 9 to scroll up, or Key 10 to scroll down, highlight the waveform profile to be edited
then press Key 12 – Edit to display the Waveform Profile Edit screen (Fig 3-35).
Fig 3-34 List of Waveform Profiles