User's Manual

M7X and M7R Page 3-27 Operation
Back to Menu
Select Between Transceiver, Transmitter or Receiver Operation
An M7X radio can be configured to operate as a transceiver, transmitter or a receiver. Configuration
should be limited to ‘transmitter’ or ‘receiver’ when operating as part of a split-site transmitter/receiver
pair connected to a controller.
To select the required configuration:
(1) From the Home screen (Fig 3-26) press Key 8 – Radio Config.
Fig 3-26 Home Screen
(2) Ensure the Edit Radio Config Settings screen is displayed (Fig 3-27).
Fig 3-27 Edit Radio Config Settings Screen – Configured as Transceiver
(3) Press Key 9 to scroll up or Key 10 to scroll down, and highlight ‘Configured As’. If the
configuration needs changing, press Key 13 – Change.