User's Manual

M7X and M7R Page 5-45 Maintenance
Back to Menu
Frequency Preset Page
The frequency preset page allows the 400 profiles to be uploaded from a radio using the Get Settings
drop-down menu (see below), or set/amended and downloaded to a radio. The parameters that make up
a frequency preset are the same as those available from the radio’s front panel; refer to Topic 3 –
Operation.
Fig 5-35 shows an example page. Any fields can be amended by selecting it and entering the required
value. When complete, download into the radio by using the Set Settings drop-down menu (see below).
If an invalid parameter is entered, a red exclamation mark (!) is returned when downloaded
Fig 5-35 Frequency Presets Page
Note:
To make the illustration easier to read, Fig 5-35 shows only part of the Frequency Presets page.
All Settings
Radio Config Settings
Freq Bands
IP Configuration
Build State
Waveform Profiles
Frequency Presets
All Settings (excluding Build State)
Radio Config Settings
Freq Bands
IP Configuration
Waveform Profiles
Frequency Presets
Build States
Get Settings drop-down menu Set Settings drop-down menu