User's Manual

M7X and M7R Page 5-43 Maintenance
Back to Menu
Build State Page
The build state page (Fig 5-33) shows information including the part number and serial number of the
connected radio and all modules fitted within the radio.
This information can be viewed only after ‘All Settings’ or ‘Build State’ has been activated from the ‘Get
Settings’ drop-down menu (see below).
Only the Radio settings (the white fields in Fig 5-33) can be set. Information regarding the modules is
uploaded from the radios.
Fig 5-33 Build State Page
All Settings
Radio Config Settings
Freq Bands
IP Configuration
Build State
Waveform Profiles
Frequency Presets
All Settings (excluding Build State)
Radio Config Settings
Freq Bands
IP Configuration
Waveform Profiles
Frequency Presets
Build States
Get Settings drop-down menu Set Settings drop-down menu