User's Manual
M7X and M7R Page 5-41 Maintenance
Back to Menu
Frequency Bands
The frequency bands page allows the radio’s frequency range to be restricted. The parameters are the
same as those available from the radio’s front panel; refer to Topic 3 – Operation. Select the required
fields in turn and enter the required value. Stop Bands (grey fields) cannot be set at the DLA, they are (if
used) returned from the radio.
When the page has been set, use Freq Bands from the Set Settings drop-down menu to download the
settings into the radio.
Fig 5-31 Frequency Bands Page