User's Manual

M7X and M7R Page 5-39 Maintenance
Back to Menu
Data Loader Application
The Data Loader Application (DLA) is a Park Air software package, supplied on CD, that provides the
ability to:
Set up, or amend radio settings (configuration, waveform profiles, frequency presets, frequency
bands and IP configuration) via a PC or laptop running Microsoft Windows.
Save radio settings and use the saved file to download settings into other radios
Download any module software into the radio after a module has been replaced
Store the radio’s build state.
Loading the Software
To use the DLA, identify the interconnecting cable (part number 17N12000021) and connect it from the
radio’s Microphone/Headset/Maintenance connector to the PC’s USB port. Then:
Insert the CD into your disk drive. The CD will autorun
If the CD does not autorun, run the CD file: Setup.exe
Follow the on screen instructions to install the software
When the DLA is ‘Run’, the DLA Start Page (Fig 5-29) is displayed.
Fig 5-29 DLA Start Page