User's Guide

Page 33
Back to Transceiver
Main Page
Band Edges
The frequency range of the transceiver is 118 to 136.975 MHz for the B6550/NB version, or 112 to
155.975 MHz for the B6550/WB version.
If required, reception can be limited to either one or two smaller parts of the frequency band by setting
the band edges BE1 to BE4. Reception is possible between BE1 and BE2 frequencies, and frequencies
between BE3 and BE4.
Table 10 Band Edge Values
BE1 BE2 BE3 BE4
B6550/NB set so that the full frequency range can be received. 118.000 136.975 118.000 136.975
B6550/WB set so that the full frequency range can be received. 112.000 155.975 112.000 155.975
Example: Transceiver set to transmit and receive only those
frequencies in the range 120 to 130 MHz.
120.000 130.000 120.000 130.000
Example: Transceiver set to transmit and receive only those
frequencies in the ranges 120 to 125 MHz and 130 to
135 MHz.
120.000 125.000 130.000 135.000
F i l l 3 S o f t w a r e
6 5 - x x x x x x x x / v v
[ D e s c r i p t i o n ]
F i l l 4 S o f t w a r e
6 5 - x x x x x x x x / v v
[ D e s c r i p t i o n ]
65-xxxxxxxx represents the software part
number and /v v represents its version.
65-xxxxxxxx represents the software part
number and /v v represents its version.
B E 1 1 1 8 . 0 0 0 M H z
B E 2 1 3 6 . 9 7 5 M H z
B E 3 1 1 8 . 0 0 0 M H z
E x i t > >
B E 4 1 3 6 . 9 7 5 M H z
E x i t < <
The Band Edge screen is accessed from the
Control screen.
Band edge frequencies can be set only in
increments of 25 kHz.
If the transceiver is required to operate over the
full range, the band edge parameters must be set
to the lowest and highest values in the range (see
Table 10).