User's Guide

Page 15
Back to Transceiver
Main Page
Standby Mode
Standby mode is a power saving feature that can be used for non-operational transceivers. When in
standby mode, most of the transceiver's circuits are inactive, the LCD is blanked, and the transceiver
cannot be keyed. To put the transceiver into standby mode, use the following procedure.
When the transceiver is in Standby mode, the red front panel Standby indicator is lit.
To Enter Standby Mode
To Exit Standby Mode
E n t e r S t a n d b y ?
Y e s N o
(1) From the Control screen select
Standby.
(2) At the Standby screen, select Yes.
(3) Check that the display blanks and
the front panel Standby indicator is
lit.
E x i t S t a n d b y ?
Y e s N o
(1) Press the Switch.
(2) Select Yes.
(3) Check that the Main screen is
displayed and that the front panel
Standby indicator is unlit.